Natural stone slate will bring depth and texture to your design.

Roll over image to zoom









:
S771
:
1/2, 3/8
:
12X12, 16X16
:
Natural Cleft
:
R: Random
:
India

:
S771
:
1/2
:
Versaille
:
Natural Cleft
:
R: Random
:
India
-
Usage Chart
Grout Joint Recommendation 1/4" to 3/8", 3/8" Durability 1 Residential: Suitable for residential use. Not recommended for commercial areas. Soundness Group C: These stones may contain holes, voids, lines of separation and structural flaws. It is standard practice to repair these stones by filling them or reinforcing them. Exterior Usage EF Suitable for covered* exterior floors in freezing and non-freezing climates.|EW Suitable for covered* exterior walls in freezing and non-freezing climates. Country of Manufacturer India Country of Origin India Polished surfaces are not recommended for floor areas where slip resistance is a concern. Our durability recommendations are only based on the technical characteristics of the stones, however, slip resistance shall still be taken into consideration when selecting the product for a specific application. Natural stone products do not meet minimum coefficient of friction thresholds recommended by safety standard setting organizations. Soundness is meant to help classify denser stones (Group A and B) from more fragile stones (Group C and D). Stones classified under Groups C and D may require additional fabrication before, during or after installation as part of regular maintenance. *Covered implies an area protected from the elements. Natural stone products are not recommended for any wet areas where they may be exposed to chemicals, such as waterlines and pools, or to extreme humidity and heat, such as steam rooms, among others. A medium bed mortar is required for tiles with at least one side greater than 15".|A sealer is recommended. (Note: Some stones, such as limestone and tumbled stone among others, should be sealed prior to grouting.)|Not recommended for shower floors.|Not recommended in wet areas.|The slip resistance of natural stone tiles vary. Caution should be used in determining if the selected stone will be sufficiently slip resistant for exterior use.|These stones contain deposits of minerals and iron that may react to moisture. Stone bleeding or rusting is a common example of this. These stones should not be used in installations where they would be exposed to standing, run off water or too much humidity. A sealer is strongly recommended but will not prevent the chemical reaction from happening|White setting materials are recommended.